What is the post support for setting in concrete used for?
Post supports for setting in concrete are still height-adjustable after setting in concrete due to the right/left-hand thread. The support feet are therefore very practical in horticulture or general construction with wooden posts.
How is the post holder constructed and how is it used?The installation of the post support is easy and takes only a short time. The support is concreted in with the dolle and thus ensures optimum stability. The post is screwed onto the carrier plate through 4 holes, each with a diameter of 10 mm.
Thanks to the adjustment range of 500 - 560 mm, height differences of 60 mm can still be compensated for after setting in concrete. The existing mandrel ensures that the screw connection with the post gains stability.
What should be considered and what are the technical details of the carrier?
Due to the hot-dip galvanizing, the post carrier is optimally protected against external weather influences. The post support 110 x 110 for setting in concrete is alternatively also available without spike.
Technical details - Adjustment range: 500 - 560 mm - Support plate: 110 x 110 mm - Material thickness support plate: 8 mm - Holes: 4 holes Ø 10 mm - Length of mandrel: 450 mm - Ø of mandrel: 25 mm - Ø of dowel: 25 mm - Length to be set in concrete: 400 mm - Material type: hot-dip galvanized steel
|Product weight:||3,48 Kg|