What is the rafter purlin anchor used for?
Rafter purlin anchors are ideal for fastening two wooden beams lying on top of each other. By simple assembly, the rafter anchors are screwed to the side of a wooden beam.
How is the connecting anchor constructed and how is it used?The rafter purlin anchor serves as a connector and is available for either left or right installation. To ensure the necessary stability for your building project, the anchors should always be installed in pairs. In case of very high loads, it is even recommended to install 2 pairs.
Depending on the length of the anchor, there are 20, 28 or 36 holes with a diameter of 5 mm per anchor.
What should be considered and what are the technical details of the rafter anchor?
Due to the Sendzimir galvanized surface of the steel, our anchors are optimally protected against the effects of weather. The rafter purlin anchors are available in the following sizes: 35 x 35 x 170 x 2 mm left or right, 35 x 35 x 210 x 2 mm left or right and 35 x 35 x 250 x 2 mm left or right.
Technical details - Dimension: 35 x 35 x 170 x 2 mm right - Length: 170 mm - Width: 35 mm - Holes: 20 holes ø 5 mm - Material thickness: 2 mm - Product type: Wood connectors - Material type: Steel - Finish: Sendzimir galvanized
|Product weight:||0,10 Kg|