What is the rafter anchor used for?
Rafter purlin anchors are ideal for fixing two wooden beams lying on top of each other. Through simple assembly, the rafter anchors are screwed to the side of a wooden beam.
How is the connector anchor constructed and how is it used?
The rafter purlin anchor serves as a connector and is available for either left or right-hand installation. To ensure your construction project the necessary stability, the anchors should always be installed in pairs. At very high loads, even an installation of 2 pairs is recommended.
Depending on the length of the anchor, there are 20, 28 and 36 holes with a diameter of 5 mm per anchor.
What should be considered and what are the technical details of the rafter purlin anchor?
Through the Sendzimir galvanized surface of the steel, our anchors are optimally protected against weathering. The rafter purlin anchors are available in the following sizes: 30 x 30 x 170 x 2 mm left or right, 30 x 30 x 210 x 2 mm left or right, 35 x 35 x 170 x 2 mm left or right, 35 x 35 x 210 x 2 mm left or right and 35 x 35 x 250 x 2 mm left or right.
Technical details - Dimension: 35 x 35 x 210 x 2 mm right - Length: 210 mm - Width: 35 mm - Holes: 20 holes Ø 5 mm - Material thickness: 2 mm - Product type: wood connector - Material type: steel - Finish: Sendzimir galvanized
