Pfostenträger Ulrich höhenverstellbar feuerverzinkt Gesamtabmessung 100 x 100 x 8 mm & 160 x 100 x 10 mm

Adjustable Post Support Ulrich M24 x 150 mm 100 x 100 mm

SKU: 331124150160b
GTIN: 4260627270316
Category: Post Support adjustable

Ulrich post supports are height-adjustable even after assembly thanks to the freely movable 8 mm thick support plate and are therefore used in many horticultural projects.

thread
top plate
bottom plate
screw set

13,60 €

incl. 19% VAT , plus (Paket EU Versand)

From	Unit price / pc.
15	12,95 €*
30	12,36 €*
60	11,83 €*

Choose tax zone / country of delivery

Currently out of stock

What is the post support used for?

Ulrich post supports are height-adjustable even after assembly due to the freely movable 8 mm thick support plate and are therefore used in many gardening projects.

How is the support foot constructed and how is this used?

The post support can be screwed to a flat concrete or wooden floor with the help of 4 holes, each with a diameter of 13 mm, or anchored with a bolt anchor.

If the foundation does not have the same height everywhere, the post support with the movable support plate and its locking nut can be adjusted in a range of 30 - 150 mm even after installation. The 150 mm long threaded rod and a diameter of 24 mm enables both the function of the height adjustment, as well as the function of a mandrel which is screwed into or out of the post during height adjustment.

What should be considered and what are the technical details of the post support?

Important:

For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to hot-dip galvanizing, the Ulrich post support is optimally protected against external weather conditions. The base plate has a dimension of 160 × 100 mm and the carrier plate has a dimension of 100 × 100 mm.

Technical details - Adjustment range: 40 - 150 mm - Support plate: 100 x 100 mm - Material thickness support plate: 8 mm - Base plate: 160 x 100 mm - Material thickness base plate: 10 mm - Thread thickness: M24 - Holes support plate: 4 holes Ø 13 mm - Holes base plate: 4 holes Ø 13 mm - Hole spacing base plate: 70 mm - Hole spacing ground plate: 70 mm & 130 mm - Hexagon nut: SW 36 - Material type: steel hot-dip galvanized