What is the half-coupling used for?
Half couplings have a hole with a diameter of 17 mm in the lower part of the coupling, so they can also be screwed on with the right screw.
How is the half clamp constructed and how is it used?
The half-coupler has a diameter of 48 mm and is therefore suitable for all scaffolds with a tube diameter of 4.83 cm.The coupling is made of galvanized steel and ribbed.
What should be considered and what are the technical details of the scaffold coupler?
All couplings are produced according to EN 74 and are provided with the corresponding test mark.
Technical data - Diameter: 48 mm - Width across flats: SW 22 - Punching: 16 mm - Type of material: Galvanized steel - According to: EN74
| Product weight: | 0,58 Kg |
Average product review
Half Coupler with brace pin SW 22 galvanized
Brace pin coupler AF 22 is a half coupling with welded toggle pin for scaffolds with toggle pin system.
Item no.: 12041004
Zum Produkt
Not available now!
Screw-on Coupler SW 22 galvanized
The AF 22 screw-on coupling is a coupler for connecting a scaffold tube and a fixed object.
Item no.: 12031003
Zum Produkt
Not available now!
Swivel Coupler AF 22 galvanized
The AF 22 swivel coupler is used to connect two scaffold tubes at a freely selectable angle to each other.
Item no.: 12021002
Zum Produkt
Available now!
