What is the post support used for?
Post support is often present in horticultural projects and proves to be very practical. Thanks to its simple and quick assembly, the support foot is very popular.
How is the post holder constructed and how is it used?The 350 mm long curved cleat of the post holder is first concreted in. Thanks to the curved cleat, the post holder gets additional stabilization in the concreted ground. The post itself is attached to the 80 x 80 x 8 mm support plate of the holder, the 4 prefabricated holes with a diameter of 8 mm help.
In addition, from a cross-section of the post of 10 cm, a rod dowel can be used for securing. This is recommended especially for lifting loads. The hole diameter on the dowel is 10 mm.
What should be considered and what technical details does the holder have?
The post holder has a high load-bearing capacity and is optimally protected against external weather influences by its hot-dip galvanization.
Technical details - Length: 490 mm - Mandrel length: 120 mm - Mandrel Ø: 24 mm - Hole Ø mandrel: 10 mm - Length stone roll: 350 mm - Ø mandrel: 24 mm - Support plate 80 x 80 mm - Material thickness support plate: 8 mm - Holes: 4 holes Ø 8 mm - Material type: steel hot-dip galvanized
|Product weight:||2,05 Kg|