- StartStart
- Scaffolding material
- Couplers
- Pull Coupler SW 22
Pull Coupler SW 22
What is the drawbar coupling used for?
The tension clamp connects two scaffold tubes with a Ø of 4.83cm. To stabilize the transition of the so-called extension, a suitable pipe connector is required.
How is the draw clamp constructed and how is it used?
Our connection clamp is made of hot-dip galvanized steel and ribbed design.The hammerhead bolts are 82 mm long and the collar nuts have a wrench size of 22. The material of the hammerhead bolts and collar nuts is yellow galvanized steel.
What should be considered and what are the technical details of the scaffold coupler?
All couplings are produced according to EN 74 and are provided with the corresponding test mark.
Technical data - Diameter: 48 mm - Width across flats: SW 22 - Type of material: Hot-dip galvanized steel - According to: EN74
Product weight: | 1,70 Kg |
Average product review
Related products


Timber Coupler SW 22
The timber coupler AF 22 is a clamp that serves as a connection between a scaffold tube and a square timber.
Item no.: 12101012
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Carrier Coupler SW 22
The AF 22 carrier coupler is used to suspend scaffold tubes from steel structures.
Item no.: 12091010
Zum Produkt

Not available now!


Shore Coupler SW 22
The shore coupler AF 22 is used as a connection with a pipe and ringoese as an anchor.
Item no.: 12081007a
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays
Equipment
This is just a small selection of our products



Collar Nut
The collar nut for the scaffold hammerhead bolts are available in different wrench sizes.
Item no.: 1407
Zum Produkt


Price on application
Available now!


Base Jack galvanized 500 mm, Ø 38 mm
The height-adjustable threaded foot plate 500 mm Ø 38 mm is perfect for leveling out uneven floor space.
Item no.: 110150038
Zum Produkt

Not available now!


Base Jack galvanized 650 mm, Ø 38 mm
The Height Adjustable Threaded Foot 650 mm Ø 38 mm is used for optimal work on uneven ground.
Item no.: 110165038
Zum Produkt

Not available now!


T-Bolt, metric thread, galvanized, M14 x 82 mm
The hammerhead bolt galvanized is used with the collar nut for a tight bolting of the coupler.
Item no.: 14065001
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Pipe Connector for pull couplers
The pipe connector for draw couplings is used for the extension of two pipes in connection with a draw coupling.
Item no.: 12071008
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays
Other customers have also bought the following items
This is just a small selection of our products


Pipe Connector for pull couplers
The pipe connector for draw couplings is used for the extension of two pipes in connection with a draw coupling.
Item no.: 12071008
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


T-Bolt, metric thread, galvanized, M14 x 82 mm
The hammerhead bolt galvanized is used with the collar nut for a tight bolting of the coupler.
Item no.: 14065001
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays



Collar Nut M 14 SW 22
The flanged nut AF 22 for scaffold clamps is used with the hammerhead bolt for a tight screw connection of the coupling.
Item no.: 14075002
Zum Produkt


Available now!
Shipping time: 2 - 3 workdays


Swivel Coupler AF 22 galvanized
The AF 22 swivel coupler is used to connect two scaffold tubes at a freely selectable angle to each other.
Item no.: 12021002
Zum Produkt

Available now!
Shipping time: 3 - 4 workdays


Swivel Coupler SW 22 hot dip
The hot-dip galvanized AF 22 swivel coupler is used to connect two scaffold tubes at freely selectable angles to each other.
Item no.: 12021002f
Zum Produkt

Not available now!


Rigid Coupler SW 22 hot dip
The hot-dip galvanized right angle coupler AF 22 is used to connect two scaffold tubes at a 90° angle to each other.
Item no.: 12011001f
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays