What is the bracing coupling used for?
The anchor coupler is used to attach scaffolds to facades. The anchor coupler is attached directly to the scaffold and connected to the welded anchor on an eyebolt.
How is the bracing clamp constructed and how is it used?
The bracing coupler has a diameter of 48 mm and is therefore suitable for all scaffolds with a tube diameter of 4.83 cm. Our coupling with hook is made of galvanized steel and ribbed design.The hammerhead bolt is 82 mm long and the collar nut has a wrench size of 22. The material of the hammerhead bolt and collar nut is yellow galvanized steel.
What should be considered and what are the technical details of the scaffold coupler?
All couplings are produced according to EN 74 and are provided with the corresponding test mark.
Technical data - Diameter: 48 mm - Width across flats: SW 22 - Type of material: Galvanized steel - According to: EN74
| Product weight: | 1,00 Kg |
Average product review
Half Coupler with tilt pin SW 22 hot dip
The brace pin coupler AF 22 hot-dip galvanized is a hot-dip galvanized clamp with tipping pin for scaffolds with tipping pin system.
Item no.: 12041004f
Zum Produkt
Not available now!
Timber Coupler SW 22
The timber coupler AF 22 is a clamp that serves as a connection between a scaffold tube and a square timber.
Item no.: 12101012
Zum Produkt
Available now!
Carrier Coupler SW 22
The AF 22 carrier coupler is used to suspend scaffold tubes from steel structures.
Item no.: 12091010
Zum Produkt
Not available now!
