What is the swivel coupler used for?
Our swivel clamps connect two scaffold tubes at a free angle to each other. They are used as flexible connection of scaffold tubes or also in connection with diagonals.
How is the swivel clamp constructed and how is it used?
The scaffold clamps have a diameter of 48 mm and are therefore suitable for all scaffolds with a tube diameter of 4.83 cm. Our swivel coupler is made of hot-dip galvanized steel and ribbed design.The hammerhead bolt is 82 mm long and the collar nut has a wrench size of 22. The material of the hammerhead bolt and collar nut is yellow galvanized steel.
What should be considered and what are the technical details of the swivel coupling?
All couplings are produced according to EN 74 and are provided with the corresponding test mark.
Technical data - Diameter: 48/48 mm - Width across flats: SW 22 - Type of material: Hot-dip galvanized steel - According to: EN74
| Product weight: | 1,37 Kg |
Average product review
Rigid Coupler SW 22 hot dip
The hot-dip galvanized right angle coupler AF 22 is used to connect two scaffold tubes at a 90° angle to each other.
Item no.: 12011001f
Zum Produkt
Available now!
Distance Coupler 48 x 48 mm, hot dip
The parallel coupler 48 x 48 mm AF 22 is a clamp that connects two parallel scaffold tubes at a fixed axial distance.
Item no.: 12111000
Zum Produkt
Available now!
Half Coupler with tilt pin SW 22 hot dip
The brace pin coupler AF 22 hot-dip galvanized is a hot-dip galvanized clamp with tipping pin for scaffolds with tipping pin system.
Item no.: 12041004f
Zum Produkt
Not available now!
