- StartStart
- Scaffolding material
- Couplers
- Reduce Right Angle Coupler
Reduce Right Angle Coupler
What is the scaffold clamp used for?
Our standard couplers connect two scaffold tubes with different diameters at 90° to each other. They are used as a rigid connection of scaffold tubes or also in connection with our scaffold anchors to fix the scaffold to the wall.
How is the clamp constructed and how is it used?
The scaffold clamps have a diameter of 48 and 60 mm and are used to connect scaffold tubes with a diameter of 4.83 cm and 6.00 cm. Our Rigid Coupler is made of hot-dip galvanized steel and ribbed design.The hammerhead bolt has a metric thread and the collar nut has a wrench size of 22. The material of the hammerhead bolt and collar nut is steel yellow zinc plated.
What should be considered and what are the technical details of the scaffold coupler?
All couplings are produced according to EN 74 and are provided with the corresponding test mark.
Technical data - Diameter: 48/60 mm - Width across flats: SW 22 - Type of material: Hot-dip galvanized steel - In accordance with: EN74
Product weight: | 1,19 Kg |
Average product review
Related products


Shore Coupler SW 22
The shore coupler AF 22 is used as a connection with a pipe and ringoese as an anchor.
Item no.: 12081007a
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Timber Coupler SW 22
The timber coupler AF 22 is a clamp that serves as a connection between a scaffold tube and a square timber.
Item no.: 12101012
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Pull Coupler SW 22
The AF 22 pull coupler is used to extend two pipes in conjunction with a pipe connector.
Item no.: 12061006
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays
alternative item
This is just a small selection of our products


Swivel Coupler SW 22 hot dip
The hot-dip galvanized AF 22 swivel coupler is used to connect two scaffold tubes at freely selectable angles to each other.
Item no.: 12021002f
Zum Produkt

Not available now!


Base Jack galvanized 300 mm, Ø 38 mm
The scaffolding spindle 300 mm Ø 38 mm is perfect to compensate for height differences of the floor.
Item no.: 110130038
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Base Jack galvanized 500 mm, Ø 38 mm
The height-adjustable threaded foot plate 500 mm Ø 38 mm is perfect for leveling out uneven floor space.
Item no.: 110150038
Zum Produkt

Not available now!


Rigid Coupler SW 22 hot dip
The hot-dip galvanized right angle coupler AF 22 is used to connect two scaffold tubes at a 90° angle to each other.
Item no.: 12011001f
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Reduce Swivel Coupler
The reducing swivel coupler 48 x 60 mm AF 22 is used to connect two pipes with a different diameter at a free angle to each other.
Item no.: 120210024860
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays
Other customers have also bought the following items
This is just a small selection of our products


Cable Ties 360 x 7,8 mm
The cable ties 360 x 7.8 mm, VE 100 made of nylon can be used flexibly and are used in many areas of application.
Item no.: 23045004a
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Roof Safety Net 2.00 x 5.00 m, green
The side protection net 2 x 5 m green encloses the individual scaffold levels from the outside and thus forms a safety catch.
Item no.: 21064000-grün
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Reduce Swivel Coupler
The reducing swivel coupler 48 x 60 mm AF 22 is used to connect two pipes with a different diameter at a free angle to each other.
Item no.: 120210024860
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Pull Coupler SW 22
The AF 22 pull coupler is used to extend two pipes in conjunction with a pipe connector.
Item no.: 12061006
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays


Swivel Coupler SW 22 hot dip
The hot-dip galvanized AF 22 swivel coupler is used to connect two scaffold tubes at freely selectable angles to each other.
Item no.: 12021002f
Zum Produkt

Not available now!


Pipe Connector for pull couplers
The pipe connector for draw couplings is used for the extension of two pipes in connection with a draw coupling.
Item no.: 12071008
Zum Produkt

Available now!
Shipping time: 2 - 3 workdays