What is the Post support used for?
Post supports Andy height adjustable are still height adjustable after installation thanks to the right/left-hand thread and are therefore used in many gardening projects.
How is the support base constructed and how is it used?
Post supports Andy height adjustable are height adjustable even after assembly thanks to the right-hand / left-hand thread and are therefore used in many horticultural projects and in modelling.
The post supports can be screwed to a level concrete or wooden floor using 4 holes per plate, each with a diameter of 10 mm. If the foundation is not the same height everywhere, the Post support Andy can be adjusted within a range of 115 mm - 160 mm. This means that height differences of up to 50 mm can be compensated for.
What should be considered and what technical details does the Post Base have?
Important:
For stability reasons, around 10 - 20 mm of the adjustment range is required as thread security. Thanks to the galvanisation, the Post support is optimally protected against external weather influences.
Technical details - Adjustment range: 115 - 160 mm - Support plate: 70 x 70 mm - Material thickness of support plate: 5 mm - Base plate: 85 x 85 mm - Material thickness of base plate: 5 mm - Holes: 8 holes Ø 10 mm - Slotted nut: AF 30 - Hole spacing of support plate: 50 mm - Hole spacing of base plate: 55 mm - Material type - Galvanised steel
Product safety information
Manufacturer information:
GeZu Impex GmbH
Zur Kisse 17
Nordrhein-Westfalen
Sundern, Deutschland, 59846
info@gezu-impex.com
https://www.gezu-impex.com
Â
| Feature |
Specification |
| Adjustment range |
115 - 160 mm |
| Long nut |
AF 30 |
| Top plate |
70 x 70 mm |
| Material thickness of top plate |
5 mm |
| Holes top plate |
4 holes Ø 10 mm |
| Hole spacing support plate |
50 mm |
| Base plate |
85 x 85 mm |
| Material thickness of base plate |
5 mm |
| Holes base plate |
4 holes 10 mm |
| Hole spacing ground plate |
55 mm |
| Material |
Galvanized steel |
Â
There are no reviews yet.
