What is the post holder used for?
Post supports Lothar for setting in concrete are still height-adjustable after setting in concrete due to the right/left thread. The support feet are therefore very practical in horticulture or general construction with wooden posts.
How is the post holder constructed and how is this used?The installation of the post support is easy and takes only a short time. The support is concreted in with the dolle and thus ensures optimal stability. The post is screwed onto the carrier plate through 4 holes, each with a diameter of 10 mm.
Thanks to the adjustment range of 500 - 560 mm, height differences of 60 mm can still be compensated after concreting.
What should be considered and what are the technical details of the support?
For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Due to the hot-dip galvanizing, the Lothar post support is optimally protected against external weather influences. The post support 110 x 110 for setting in concrete is alternatively also available with a spike.
Technical details - Adjustment range: 500 - 560 mm - Support plate: 110 x 110 mm - Material thickness of support plate: 8 mm - Holes: 4 holes Ø 10 mm - Slotted nut: SW 30 - Ø of cleat: 25 mm - Length to be set in concrete: 400 mm - Material type: hot-dip galvanized steel
|Product weight:||2,93 Kg|