What is the gate stop used for?
The door stopper holds the opened gates and doors and prevents uncontrolled slamming.
How is the gate stop constructed and how is it used?
The door stop is doweled on a concrete or wooden foundation through the 4 holes. The perforated plate angle is screwed to the gate or door through the 3 pre-drilled holes. The locking hook hooks into the angle to fix the open door.
The door is released again by applying a little pressure on the rear part of the locking hook. When mounting, make sure that the screw holes of the bracket are at the height of the locking hook, so that the bracket also serves as a stop point.
What should be considered and what are the technical details of the doorstop?
Thanks to the galvanic zinc coating, the gate holders are well protected against external weather conditions.
Technical data - Available dimensions: 120 x 60 x 125 mm - Bolt thickness: 8 mm - Holes angle: 3 holes Ø 5 mm - Holes bottom plate: 4 holes Ø 7 mm - Material thickness: bottom plate 2,5 mm - Material: steel - Finish: galvanized - Product type: Door accessories