What is the Rafter purlin anchor used for
Rafter purlin anchors are ideal for fastening two wooden beams on top of each other. The Rafter purlin anchors are screwed to the side of a wooden beam by simple assembly.
How is the connecting anchor constructed and how is it used?
The Rafter purlin anchor serves as a connector and is available for either left or right-hand installation. To ensure the necessary stability for your construction project, the anchors should always be installed in pairs. For very high loads, we even recommend installing 2 pairs.
Depending on the length of the anchor, there are 20, 28 or 36 holes with a diameter of 5 mm per anchor.
What should be considered and what technical details does the Rafter purlin anchor have?
The hot-dip galvanised surface of the steel means that our anchors are optimally protected against the effects of weathering. The Rafter purlin anchors are available in the following sizes: 30 x 30 x 170 x 2 mm left or right, 30 x 30 x 210 x 2 mm left or right, 35 x 35 x 170 x 2 mm left or right, 35 x 35 x 210 x 2 mm left or right and 35 x 35 x 250 x 2 mm left or right.
Technical details - Dimensions: 30 x 30 x 210 x 2 mm left - Length: 210 mm - Width: 30 mm - Holes: 20 holes Ø 5 mm - Material thickness: 2 mm - Product type: Wooden connector - Material type: Steel - Finish: Hot dip galvanised
| Item information |
Value |
| Item weight: |
0,13 kg
|
Product safety information
Manufacturer information:
GeZu Impex GmbH
Zur Kisse 17
Nordrhein-Westfalen
Sundern, Deutschland, 59846
info@gezu-impex.com
https://www.gezu-impex.com
There are no reviews yet.
