What is the post holder used for?
Post support Hans are height adjustable due to the C-shaped support plate even after installation. Therefore, the support legs are very practical in horticulture or general construction with wooden posts.
How is the support foot constructed and how is this used?
The post support can be screwed to a level concrete or wooden floor by means of 4 holes or anchored by means of bolt anchors.
If the foundation is not the same height everywhere, the post support can be adjusted with the movable support plate and its locking nut even after installation. The threaded rod enables both the function of height adjustment and the function of a mandrel which is screwed in or out of the post when the height is adjusted.
What should be considered and what are the technical details of the post support?
For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to the galvanization, the Hans post support is optimally protected against external weather influences.
Technical details - Adjustment range: 50 - 150 mm/50 - 250 mm/50 - 500 mm - Support plate: 80 x 80 mm/100 x 100 mm - Base plate: 100 x 100 mm/160 x 100 mm - Thread strength: M24/M30 - Material type: hot-dip galvanized steel