What is the corner connector used for?
Angle connectors are ideally suited for the corner connection of two wooden elements. These angles are used in a wide range of applications for wooden structures such as carports, garden houses or roof trusses.
How is the wooden connector constructed and how is it used?
The holes with the diameter of 5 mm, 9 mm and 11 mm are already pre-drilled, which allows easy mounting with the appropriate mounting accessories. The number of holes depends on the size of the angle connector. You will find the details in parentheses with the available sizes.
Thanks to the sendzimir galvanized steel, the angle connectors are particularly weather-resistant and suitable for both indoor and outdoor use. Depending on the size, they have a material thickness of 2.5 mm to 3 mm. Please note that the number of angles to be used depends on the static requirements.
What should be considered and what are the technical details of the corner bracket?
The angle connectors are available in the following sizes: 50 x 50 x 35 x 2.5 mm (7 holes Ø 5 mm, 1 hole Ø 9 mm), 70 x 70 x 55 x 2.5 mm (16 holes Ø 5 mm, 2 holes Ø 9 mm), 90 x 90 x 40 x 3 mm (10 holes Ø 5 mm), 90 x 90 x 65 x 2.5 mm (15 holes Ø 5 mm, 5 holes Ø 11 mm), 90 x 35 x 40 x 3 mm (10 holes Ø 5 mm, 2 holes Ø 10 mm), 105 x 105 x 90 x 3 mm (19 holes Ø 5 mm, 6 holes Ø 11 mm).
Technical details - Dimension: 105 x 105 x 90 x 3 mm - Leg length: 105 mm - Leg width: 90 mm - Holes: 19 holes Ø 5 mm - Holes: 6 holes Ø 11 mm - Material thickness: 3 mm - Product type: Wood connector - Material type: Steel - Finish: Sendzimir galvanized
