Hot-dip galvanised Base Jack Ø 38 mm Total length 800 mm

Swivel Base Jack Ø 38 mm

SKU: 1104
HAN: 1104
Category: Base Jack

The Scaffolding spindle swivelling Ø 38 mm is a height-adjustable scaffolding base with a swivelling threaded rod.

lenght

from

16,43 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Available immediately

This item has variations. Please select the requested variation.

What is the spindle base used for?

Our height-adjustable Screw Jack with base plates are used to compensate for height differences in the ground. Within the adjustment range, the scaffolding base plates allow scaffolding to be erected safely and horizontally. Thanks to the swivelling base plate, assembly on a slope is possible without any problems.

How is the scaffolding base constructed and how is it used?

The scaffolding bases have a Ø of 38 mm and are therefore suitable for all scaffolding with a tube diameter of 4.83 cm. They are available from us in the following lengths: 500 mm and 800 mm

The base plate of the Base Jack has a size of 150 x 150 mm and is perforated with four holes. This means that nothing stands in the way of anchoring to the ground. Our spindles are made of galvanised steel and are manufactured in accordance with DIN 4425

What should be noted and what technical details does the spindle have

Important:

For stability reasons, the top 150 mm - 250 mm of a Base Jack must not be used. There is therefore a lock at this threaded point to prevent the handle nut from being unscrewed.

Technical data - Available length: 500 mm and 800 mm - Diameter: 38 mm - Base plate: 150 x 150 mm - Base plate holes: 2 holes Ø 10 mm & 2 holes Ø 17 mm - In accordance with: DIN 4425 - Material type: galvanised steel

Feature	Specification
Diameter	38 mm
Available lenght	500 mm, 800 mm
Base plate	150 x 150 mm
Holes base plate	2 holes Ø 10 mm
Holes base plate	2 holes Ø 17 mm
According to	DIN 4425
Material	Galvanized steel