"
What is the scaffolding spindle used for?
Scaffolding spindles are the basis of scaffolding construction. They consist of the
base plate, the spindle and the grip nut. This threaded base plate provides
alone or with additional planks ensures that the scaffolding rests on stable foundations.
on stable foundations. In addition, scaffolding supports help with levelling on uneven ground.
levelling on uneven ground. If this is slightly lower or higher in some places
lower or higher, or if the ground has a slope, they can still help to create straight and stable
straight and stable scaffolding constructions. Together with load-bearing
and scaffolding planks, the scaffolding can support its own load and additional loads.
optimally distribute its own load and additional loads. With their help, the resulting scaffolding can be
can therefore be adjusted vertically and horizontally. According to current law, building or façade scaffolding must always be erected in a levelled position. However, as hardly any
ground or floor is completely level, in almost all cases it is necessary to use
scaffolding supports must be used for readjustment. This is the only way to make the scaffolding completely
stable and load-bearing. In addition to optimum alignment and load distribution
galvanised scaffolding spindles also serve to protect the substrate in the best possible way.
protect the substrate in the best possible way.
Which device spindles are available from GeZu Impex?
Gear spindles are available in various designs.
For example, with a base plate or on a castor or swivelling spindle. If the
spindle is on castors, smaller units become mobile. This makes many
work around the house is made easier. Our range includes scaffolding spindles with a diameter of 38
mm or 34 mm diameter. The spindles are also available in lengths between 30 and 100 cm.
and 100 cm are available. Device spindles with swivel castors enable the flexible
flexible repositioning of the device, for example along a house wall. With their help
can also be used to compensate for large differences in height, such as with
basement light shafts, for example.
What load capacity can scaffolding spindles hold?
What load capacity a scaffolding and its structural components can withstand
must withstand can be found in the DIN standards. The requirements specified therein must
every component and also every scaffolding spindle that is labelled with the corresponding
DIN standard. DIN 4425, for example, specifies the "design requirements
requirements, load-bearing safety and the manufacture of light-weight spindles". The
load-bearing capacity of a scaffolding base is specified by many manufacturers in kilonewtons or
kN for short. One kN stands for 101.97 kg.
For example, a scaffold base 38 mm on swivel castors from the range offers
a maximum load capacity of 10 kN. Devices with a base plate even offer a resistance of up to
resistance of up to 50 kN. However, this does not mean that this load
permanently permissible on the scaffolding. What loads the various
The loads that the various scaffolding systems can bear are specified in the manufacturers' "Instructions for assembly and use"
of the manufacturer on the basis of DIN EN 12811-1, section 6"".Â
Can you assemble devices yourself?
Not only professional scaffolding builders are allowed to assemble scaffolding. Also
private DIY enthusiasts can also erect scaffolding, for example to erect high
walls, ceilings or the facade. However, private individuals must
must adhere to various rules. Anyone who erects a scaffolding on their private
property, for example, does not need official authorisation. As soon as a
part of the scaffolding is erected on a public footpath, a building permit must be obtained.
a building permit must be obtained. Whether a scaffold is necessary for the work in question
around the house is also determined by law. From a working height
of three metres, the erection of scaffolding is mandatory. If a tradesman is working on it
work on it, the structure must also be approved by an expert inspector.
approved. This is stipulated by the rules of occupational health and safety
regulations.
There are also various regulations when setting up the equipment.
For example, attention must be paid to the maximum permissible distance from the house wall and the length
the length and type of scaffolding anchoring. For reasons of stability
the top 15 cm / 20 cm of a scaffolding spindle must not be used.
There is therefore a lock at this threaded point to prevent the handle nut from being unscrewed.
the handle nut. Simply setting up the scaffold with scaffold legs is not sufficient.
is not sufficient. The construction and work equipment must also be anchored. Scaffoldings and accessories can be found
also in our range. This creates a stable basis for safe working
on the construction site.Â
If you have any questions about our products and their use, simply contact us
üvia the contact form, we will be happy to advise you!"
"
