What is the spacer coupling used for?
Parallel couplers connect two parallel scaffold tubes at a fixed center distance. The couplings create a non-positive connection in scaffold construction.
How is the spacer clamp constructed and how is it used?
These scaffold clamps are suitable for scaffold tubes with an outer diameter of 48.3 mm.They are made of hot-dip galvanized steel and are available to the ribbed version. The hammerhead bolt with metric thread has a length of 82 mm and a diameter of 14 mm. Like the hammerhead bolt, the collar nut (SW22) is galvanized.
What should be considered and what are the technical details of the scaffold coupler?
The parallel couplings are produced in accordance with DIN EN 74 and bear the corresponding test mark.
Technical data - Width across flats: SW 22 - Width 8 cm (measured from center of tube to center of tube) - Type of material: Hot-dip galvanized steel - According to: EN74
| Product weight: | 1,34 Kg |
Average product review
Swivel Coupler SW 22 hot dip
The hot-dip galvanized AF 22 swivel coupler is used to connect two scaffold tubes at freely selectable angles to each other.
Item no.: 12021002f
Zum Produkt
Available now!
Half Coupler with tilt pin SW 22 hot dip
The brace pin coupler AF 22 hot-dip galvanized is a hot-dip galvanized clamp with tipping pin for scaffolds with tipping pin system.
Item no.: 12041004f
Zum Produkt
Available now!
Timber Coupler SW 22
The timber coupler AF 22 is a clamp that serves as a connection between a scaffold tube and a square timber.
Item no.: 12101012
Zum Produkt
Available now!
