What is the threaded foot used for?
Our height-adjustable threaded base plates are used to compensate for differences in the height of the ground. Within the adjustment range, the scaffold base plates allow scaffolds to be erected safely and horizontally.
How is the spindle foot constructed and how is it used?
The scaffold feet have a Ø of 38 mm and are therefore suitable for all scaffolds with a tube diameter of 4.83 cm. They are available in the following lengths: 300 mm, 500 mm, 600 mm, 650 mm, 800 mm, 950 mm, 1000 mm.
The base plate of the scaffold spindle has a size of 150 x 150 mm and is four-hole punched. The opposite holes on the base plate have a diameter of 10 mm, 11 mm and 15 mm, 17 mm. This means that nothing stands in the way of anchoring to the ground. Our spindles are made of hot-dip galvanized steel and are manufactured according to DIN 4425.
What should be considered and what are the technical details of the threaded foot plate?
Important:
For stability reasons, the top 150 mm / 200 mm of a scaffold spindle must not be used. Therefore, there is a lock at this threaded point to prevent the handle nut from being unscrewed.
Technical data - length: 650 mm (working height - 500 mm) - diameter: 38 mm - base plate: 150 x 150 mm - Base plate holes: 2 holes Ø 10 mm & 2 holes Ø 15 mm - according to: DIN 4425 - material type: hot-dip galvanized
