What is the post support used for?
Post holders Konrad are height-adjustable due to the right / left thread even after assembly and therefore find their use in many horticultural projects.
How is the support foot constructed and how is this used?
The post supports can be screwed to a level concrete or wooden floor by means of 4 holes per plate, each with a diameter of 13 mm. If the foundation is not the same height everywhere, the Konrad post support can be adjusted within a range of 140 mm - 200 mm.In order to avoid unintentional adjustment of the height, the post supports are equipped with a lock nut. The lock nut is screwed against the long nut and thus prevents unintentional loosening.
What should be considered and what are the technical details of the post support?Important:
For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to the galvanization, the Konrad post support is optimally protected against external weather influences.
Technical details - Adjustment range: 140 - 200 mm - Support plate: 80 mm x 80 mm - Material thickness support plate: 8 mm - Base plate: 80 mm x 160 mm - Material thickness base plate: 6 mm - Holes: 6 holes Ø 13 mm & 2 slotted holes Ø 13 mm - Lock nut: SW 30 - Material type: galvanized steel
Important:
For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to the galvanization, the Konrad post support is optimally protected against external weather influences.
Technical details - Adjustment range: 140 - 200 mm - Support plate: 80 mm x 80 mm - Material thickness support plate: 8 mm - Base plate: 80 mm x 160 mm - Material thickness base plate: 6 mm - Holes: 6 holes Ø 13 mm & 2 slotted holes Ø 13 mm - Lock nut: SW 30 - Material type: galvanized steel
| Product weight: | 1,70 Kg |
Average product review
Adjustable Post Support Walter 80 x 80 mm
4 x Post Support Konrad adjustable 80 x 80 mm
Adjustable Post Support Paul to set in concrete 80 x 80 mm
