What is the U-Type Post support with ripped pin used for?
U-Type Post support with ripped pin for setting in concrete is mainly used to easily fasten wattle and privacy fences under 1.20 m.
How is the U-Type Post support constructed and how is it used?
The 200 mm long ripped pin of the Post support is set in concrete and is therefore permanently anchored in the ground. Once anchored, the wooden posts can be easily attached using suitable wood screws. The necessary holes are already provided with a Ø of 11 mm.
When installing, it is important to ensure that there is a small gap between the post and the post support to allow the post to ventilate and thus protect it from moisture. The U-Type Post support with ripped pin is available in the following fork widths: 71 mm, 81 mm, 91 mm, 101 mm, 111 mm, 116 mm, 121 mm, 141 mm
What to consider and what technical details does the Post support have
The fork is 100 mm high and is made of 4 mm hot-dip galvanised steel. Our Post supports are well protected against external weather influences thanks to the hot-dip galvanising.
Technical data - Fork width / clear width: 81 mm - Fork height: 100 mm - Fork depth: 60 mm - Fork thickness: 4 mm - Holes: 6 holes Ø 11 mm - Length of Pin: 200 mm - Ø of Pin: 18 mm - Material type: hot-dip galvanised steel
Product safety information
Manufacturer information:
GeZu Impex GmbH
Zur Kisse 17
Nordrhein-Westfalen
Sundern, Deutschland, 59846
info@gezu-impex.com
https://www.gezu-impex.com
Â
| Feature |
Specification |
| Clear width |
81 mm |
| Height of bracket |
100 mm |
| Thickness of bracket |
4 mm |
| Depth of bracket |
60 mm |
| Width of bracket |
81 mm |
| Holes |
6 holes Ø 11 mm |
| Lenght of pin |
200 mm |
| Ø of Pin |
18 mm |
| Material |
Hot-dip galvanized steel |
There are no reviews yet.
