Choose your country of delivery to see prices and products for your location.

Adjustable Post Support Ulrich M24 x 150 mm 80 x 80 mm

Item number: 331124150100b


9,50 €

including 19% VAT. , plus shipping (Paket EU Versand)

Choose tax zone / country of delivery

From pc. Price per unit
15 9,05 €
30 8,64 €
60 8,27 €
Not available now!

Ulrich post supports are height-adjustable even after assembly due to the freely movable 6 mm thick support plate and are therefore used in many horticultural projects

.

Category: Post Support adjustable

thread
top plate
bottom plate
screw set

What is the post support used for?

Ulrich post supports are height-adjustable even after assembly due to the freely movable 6 mm thick support plate and are therefore used in many horticultural projects.

How is the support foot constructed and how is this used?

The post support can be screwed to a flat concrete or wooden floor with the help of 4 holes, each with a diameter of 13 mm, or anchored with a bolt anchor.

If the foundation does not have the same height everywhere, the post support with the movable support plate and its locking nut can be adjusted in a range of 30 - 150 mm even after installation. The 150 mm long threaded rod and a diameter of 24 mm enables both the function of the height adjustment, as well as the function of a mandrel which is screwed into or out of the post during height adjustment.

What should be considered and what are the technical details of the post support?

Important:

For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to hot-dip galvanizing, the Ulrich post support is optimally protected against external weather conditions. The base plate has a dimension of 100 × 100 mm and the carrier plate has a dimension of 80 × 80 mm.

Technical details - Adjustment range: 40 - 150 mm - Support plate: 80 x 80 mm - Material thickness support plate: 6 mm - Base plate: 100 x 100 mm - Material thickness base plate: 8 mm - Thread strength: M24 - Holes support plate: 4 holes Ø 12 mm - Holes base plate: 4 holes Ø 13 mm - Hexagon nut: SW 36 - Material type: steel hot-dip galvanized


Product weight: 1,42 Kg

Average product review

Write your first review and help others with their purchase decision:

Contact


Related products

Equipment

This is just a small selection of our products

Other customers have also bought the following items

This is just a small selection of our products