What is the post holder used for?
Post support is often present in horticultural projects and proves to be very practical. Thanks to its simple and quick assembly, the support foot is very popular.
How is the post support constructed and how is it used?The 200 mm or 400 mm long stone roller of the post holder is first set in concrete. The post itself is fixed to the 80 x 80 x 8 mm support plate of the holder, helped by the 4 prefabricated holes with a diameter of 8 mm.
In addition, from a cross-section of the post of 10 cm, a rod dowel can be used for securing. This is recommended especially for lifting loads. The hole diameter on the dowel is 10 mm.
What should be considered and what are the technical details of the carrier?
The post holder has a high load-bearing capacity and is optimally protected against external weather influences by its hot-dip galvanization.
Technical details - Available lengths: 540 mm & 325 mm - Mandrel length: 120 mm - Mandrel Ø: 24 mm - Hole Ø mandrel: 10 mm - Length stone roller: 200 mm or 400 mm - Ø stone roller: 21 mm - Support plate 80 x 80 mm - Material thickness support plate: 8 mm - Holes: 4 holes Ø 8 mm - Material type: steel hot-dip galvanized