Pfostenträger Hans höhenverstellbar feuerverzinkt Gesamtabmessung 100 x 100 x 8 mm & 160 x 100 x 10 mm

Adjustable Post Support Hans M30 x 250 mm 100 x 100 mm

Pfostenträger Hans verstellbar M30 x 250 mm, 100 x 100 mm mit Trägerplatte und Sechskantmutter

Adjustable Post Support Hans M30 x 250 mm 100 x 100 mm

SKU: 331230250160b
GTIN: 4260627270408
Category: Post Support adjustable

Post supports Hans are height-adjustable even after assembly due to the C-shaped 8 mm thick support plate. The support legs are therefore very practical in horticulture or general construction with wooden posts.

thread
top plate
bottom plate
screw set

18,69 €

incl. 19% VAT , plus (Paket EU Versand)

From	Unit price / pc.
15	17,80 €*
30	16,99 €*
60	16,26 €*

Choose tax zone / country of delivery

Available immediately
Delivery time: 3 - 4 Workdays (DE - int. shipments may differ)

pc.

Description
Reviews

What is the post holder used for?

Post support Hans are height adjustable even after installation due to the C-shaped 8 mm thick support plate. Therefore, the support legs are very practical in horticulture or general construction with wooden posts.

How is the support foot constructed and how is this used?

The post support can be screwed to a flat concreted or wooden floor or anchored by means of bolt anchors with the help of 4 holes, each of which has a diameter of 13 mm.

If the foundation does not have the same height everywhere, the post support with the movable support plate and its locking nut can be adjusted in a range of 50 - 250 mm even after installation. The 250 mm long threaded rod enables both the function of height adjustment and the function of a mandrel which is screwed in or out of the post when the height is adjusted.

What should be considered and what are the technical details of the post support?

Important:

For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to hot-dip galvanizing, the Hans post support is optimally protected against external weather conditions. The base plate has a dimension of 160 × 100 mm and the carrier plate has a dimension of 100 × 100 mm.

Technical details - Adjustment range: 50 - 250 mm - Support plate: 100 x 100 mm - Material thickness support plate: 8 mm - Base plate: 160 x 100 mm - Material thickness base plate: 10 mm - Holes support plate: 4 holes Ø 12 mm - Holes base plate: 4 holes Ø 13 mm - Hole spacing base plate: 70 mm - Hole spacing ground plate: 70 mm & 130 mm - Hexagon nut: SW 46 - Material type: hot-dip galvanized steel