Choose your country of delivery to see prices and products for your location.
Choose tax zone / country of delivery
Post support Hans are height adjustable even after installation due to the C-shaped 8 mm thick support plate. Therefore, the support legs are very practical in horticulture or general construction with wooden posts.
If the foundation does not have the same height everywhere, the post support with the movable support plate and its locking nut can be adjusted in a range of 50 - 500 mm even after installation. The 550 mm long threaded rod enables both the function of height adjustment and the function of a mandrel which is screwed in or out of the post when the height is adjusted.
Important:
For stability reasons, approximately 10 - 20 mm of the adjustment range is required as thread security. Thanks to hot-dip galvanizing, the Hans post support is optimally protected against external weather conditions. The base plate has a dimension of 160 × 100 mm and the carrier plate has a dimension of 100 × 100 mm.
Technical details - Adjustment range: 50 - 500 mm - Support plate: 100 x 100 mm - Material thickness support plate: 8 mm - Base plate: 160 x 100 mm - Material thickness base plate: 10 mm - Holes support plate: 4 holes Ø 12 mm - Holes Base plate: 4 holes Ø 13 mm - Hole spacing base plate: 70 mm - Hole spacing ground plate: 70 mm & 130 mm - Hexagon nut: SW 46 - Material type: hot-dip galvanized steel
There are no reviews yet.
Please see our Privacy Policy