What is the height adjustable Post support adjustable used for
Post supports Ulrich are very practical and are used in many garden projects. Thanks to the freely movable 8 mm thick support plate, the post can still be adjusted in height even after installation.
How is the support base constructed and how is it used?
The Post support can be screwed to a level concrete or wooden floor using 4 holes, each with a diameter of 13 mm, or anchored using bolt anchors.
If the foundation does not have the same height everywhere, the Post support can be adjusted with the movable support plate and its locking nut in a range of 50 - 480 mm even after installation. The 500 mm long and 30 mm thick threaded rod enables both the height adjustment function and the function of a Mandrel that is screwed into or out of the post when the height is adjusted. It is important to pay attention to the 2 cm thread safety when adjusting the height.
What should be considered and what technical details does the Post Base have?
Important
For stability reasons, around 10 - 20 mm of the adjustment range is required as thread safety. Thanks to the hot-dip galvanisation, the Ulrich post support is optimally protected against external weather influences. The base plate measures 160 × 100 mm and the support plate measures 100 × 100 mm.
Technical details - Adjustment range: 50 - 480 mm - Support plate: 100 x 100 mm - Support plate material thickness: 8 mm - Support plate holes: 4 holes Ø 13 mm - Support plate hole spacing: 70 mm - Base plate: 160 x 100 mm - Base plate material thickness: 10 mm - Base plate holes: 4 holes Ø 13 mm - Base plate hole spacing: 70 mm & 130 mm - Thread thickness: M30 - Hexagon nut: AF 46 - Material type: Hot-dip galvanised steel
| Item information |
Value |
| Item weight: |
4,30 kg
|
Product safety information
Manufacturer information:
GeZu Impex GmbH
Zur Kisse 17
Nordrhein-Westfalen
Sundern, Deutschland, 59846
info@gezu-impex.com
https://www.gezu-impex.com
Â
| Feature |
Specification |
| Adjustment range |
50 - 480 mm |
| Hexagon nut |
AF 46 |
| Ø pin / thread |
30 mm |
| Top plate |
100 x 100 mm |
| Material thickness of top plate |
8 mm |
| Holes top plate |
4 holes Ø 13 mm |
| Hole spacing support plate |
70 mm |
| Ground plate |
160 x 100 mm |
| Material thickness of ground plate |
10 mm |
| Holes ground plate |
4 holes Ø 13 mm |
| Hole spacing ground plate |
70 & 130 mm |
| Material |
Hot-dip galvanized steel |
There are no reviews yet.
